John Deere Bulldozer Face Seals in Seattle - Our enterprise offers a range of various aftermarket accessories and parts for all types of excavators, loaders, and bulldozers. Our knowledgeable Seattle group of parts professionals are ready to help you locate the parts you're after.
The series offers a load capacity between 8 and 12 tons, placing between the 5 to 8 ton capacity of the LC1100 and the twelve to forty eight ton LC2100 model. Additionally, the LC1600 family brings together the advantages of both series which shares a range of elements.
Linden Comansa's Flat-Top modular system was designed for the LC 2100, and is now in all the tower cranes built by the company. This series incorporates many innovations in the specific machine.
There are 4 Flat-Top cranes in the LC 2100 series. These cranes have the denominations of 21 LC 290, 21 LC 550 and the 21 LC 400. The newest addition to the series is the 21 LC 750. The 21 LC 750 crane is the largest in the series. It is outfitted with 80 meters of jib length and 7 tons of jib-end load. This tower crane offers a maximum load of 48 tons.
The LC3000 series by Comansa is formed by 2 models: the 30 LC 1100 and the 30 LC 1400. These two models are also in 3 different versions with various load capacities. The ranges of load capacities are ten thousand five hundred fifty; one hundred five thousand eight hundred twenty and one hundred forty one thousand ninety pounds or 32, forty eight and 64 tons. The largest Flat-Top tower cranes have mainly been designed for public works, heavy industry, construction and mining applications.
You can normally find pneumatic forklifts in shipping and warehouse operations. Also called pump trucks or pallet trucks, they are used to move things and materials around on wooden pallets using metal forks mounted on a wheeled counterweight. The counterweight has a pump which could lift the forks off the ground. A pallet truck is designed to be operated by a single individual.
To avoid loosing control while lifting heavy loads, pallet trucks should always be operated carefully. Equipment should be inspected prior to operating. Clear the wheels area of any obstacle. Make sure that the handle smoothly turns. The pallet should be stacked carefully to ensure that nothing would fall off during transportation.
In order to lower the forks and release air in the pump, squeeze the lever located on the inside of the metal loop on the end of the pallet truck's handle. The forks could then be pushed into the slots of the pallet. The forks must be at the center so as to guarantee even distribution of the pallet's weight across them. Raise the forks from the ground by pumping the handle of the pneumatic lift until the pallet has cleared the ground completely. Do not lift the pallet too high or the forklift can unbalance.
